Privacy Fence in Denver in Denver, CO

HOA-compliant privacy fencing for Denver. We prepare and submit the Architectural Review package for Lowry, Central Park, Highlands, and Stapleton.

Get Free Quote

You want a privacy fence in Denver, and if you're in an HOA neighborhood the real hurdle isn't the fence, it's the approval. Here's the direct answer: J.A's Privacy and Perimeter is a licensed and insured Colorado fence contractor, owner Julian Lopez has been building privacy fences across the Denver metro for 15+ years with 500+ projects on the ground, and we prepare and submit the Architectural Review Committee package for you. We handle the Denver permit, coordinate the height, color, and material your HOA requires, and set every post to frost depth in the city's clay soil. The crew that quotes you is the crew that builds you. We don't subcontract, and you get a written, itemized quote before any work starts.

The reason this page exists, separate from our main privacy fencing page, is that a Denver privacy fence lives or dies on two things most contractors treat as an afterthought: whether it clears the Architectural Review Committee in ARC-heavy neighborhoods like Lowry, Central Park, and Stapleton, and whether the footing is deep enough to survive Front Range clay. A gorgeous board-on-board run means nothing if the committee bounces it, and a fast install means nothing if the posts heave out of Wash Park's clay two winters later.

Whether you're fencing a new build in Central Park or replacing a leaning cedar run in Capitol Hill, the fastest path to a real number and a clear read on your HOA's rules is a free on-site walk-through. Talk to us directly at [720-609-6094](tel:+17206096094).

What We Offer

HOA-compliant privacy fence installation across Denver
Architectural Review Committee package prepared and submitted for you
ARC experience in Lowry, Central Park, Highlands, and Stapleton
PostMaster steel-core posts, 36-inch footings, gravel base, domed concrete crown
Board-on-board, shadowbox, board-and-batten, and hit-and-miss horizontal cedar
Aluminum-reinforced vinyl and composite for wood-look HOA neighborhoods
Denver permit handled in-house when the build requires one
Corner-lot sight-triangle and setback checked before quoting
Written, itemized quotes before work starts
Owner Julian Lopez on every job, no subcontracting

Privacy Fence Denver: What We Handle That Others Skip

A standard 6-foot privacy fence install in Denver runs 1 to 3 days for a typical residential lot, and the two things that decide whether it holds up and stays up are the footing and the paperwork. We set PostMaster steel-core posts on wood builds, footings to 36 inches on a gravel base with a domed concrete crown, and we prepare the HOA and permit package before a single post hole gets dug.

<aside class="my-6 rounded-md border border-border bg-card p-4 text-sm">Denver reality: the metro averages 100+ freeze-thaw cycles a year and much of the city sits on expansive clay. A post set in a shallow footing heaves; a post set to 36 inches on gravel with a domed crown sheds water and stays put. Depth is the single biggest reason a Denver fence lasts or leans.</aside>

Here's what a Denver privacy fence install includes when we do it:

PostMaster steel-core posts on every wood build, set 36 inches deep on gravel with a domed concrete crown
Board-on-board, shadowbox, board-and-batten, or hit-and-miss horizontal in #1 Grade Western Red Cedar
Aluminum-reinforced vinyl and composite when your HOA wants a wood look without the upkeep
Denver permit pulled in-house when the build requires one
Architectural Review Committee package prepared and submitted for you
Grade correction on sloped lots so the fence follows the ground without triangular gaps

Want the honest scope for your lot before anyone digs? [Get a free quote](/contact) and we'll itemize it.

HOA-Compliant Fence Installation in Denver: We Prepare the ARC Package

HOA-compliant fence installation in Denver means the fence has to satisfy two separate rulebooks: the City and County of Denver's zoning and permit rules, and your HOA's Architectural Review Committee, which sets its own material, color, height, and orientation standards on top of city code. We handle both. In ARC-heavy neighborhoods like Lowry, Central Park, Highlands, and Stapleton, the committee submission is where most projects stall, so we prepare and submit that package ourselves.

<blockquote class="my-6 border-l-4 border-accent pl-4 italic text-foreground/85">"In Lowry, Central Park, and Stapleton, the committee submission is the actual project bottleneck, not the build. That's the piece we take off your plate: we submit the ARC package so the fence that goes up is the fence that stays up, without a redo."</blockquote>

Different Denver HOAs care about different things, and after 15+ years across these neighborhoods here's the pattern we see most:

Finished-side-out rules. Many committees require the smooth face toward the street or the neighbor, which is why shadowbox and board-and-batten get approved where a one-sided dog-ear gets bounced.
Approved material and color lists. Some neighborhoods mandate a wood look, which is where composite and quality vinyl earn their keep.
Coordinated height and setback. On shared borders the committee often wants your run to match the adjacent one so the edge reads as a single line.

We keep those specs straight, put them in the submission, and coordinate with adjacent runs where the committee requires it. You don't chase paperwork.

Not sure what your committee requires? Call [720-609-6094](tel:+17206096094) and we'll read your HOA's spec before we quote.

HOA Fencing Services in Denver: How the Approval Actually Goes

HOA fencing services in Denver are as much a paperwork job as a build job, and the sequence matters because getting it out of order is how projects get delayed or hit with a violation notice after the fact. Here's how we run it so you're not the one waiting on signatures.

We read your HOA status and Denver zoning first. Interior lots, corner lots, and shared-border lots each carry different rules, and a fence for a Denver homeowners association is a different conversation than a fence on an unassociated lot.
We prepare the Architectural Review Committee package. Material, color, height, orientation, and a site drawing, coordinated with adjacent runs where the committee requires it.
We submit it and track approval. Committees run on their own review calendars, so we build the timeline around when your HOA actually meets rather than promising a date we can't control.
We pull the Denver permit when the build requires one. Height, gate automation, and setback are the usual triggers; a like-for-like replacement at standard height often doesn't need one.
We build to the approved spec. No surprises, no violation notices, no redo.

<aside class="my-6 rounded-md border border-border bg-card p-4 text-sm">Timeline honesty: the build is 1 to 3 days, but committee review is the variable we can't rush. We start the ARC submission early so approval and your install slot line up instead of stacking delay on delay.</aside>

Not for you: when you don't need us yet

Here's the line most fence companies won't say out loud. If your privacy fence is under about 10 years old, the posts are still solid, and the damage is a couple of cracked pickets or one loose rail, you don't need a new fence and you may not need us at all. That's a repair, often a Saturday-afternoon repair you can handle yourself, and it won't trigger an ARC submission. Call a full-replacement crew for that and you're paying for a job the fence doesn't need. We'd rather quote you the repair, or tell you to wait, than sell you a teardown.

If it's genuinely time to replace, [request a no-obligation estimate](/contact) and we'll put both options in writing.

Materials Built for Denver: Cedar, Vinyl, and Composite

The right material for a Denver privacy fence depends on your HOA's approved list, your lot's exposure, and how much maintenance you want to sign up for. We install all three of the common options and match the choice to your situation rather than pushing one line.

Western Red Cedar

Cedar is the right wood for this climate. Natural oils resist rot from the inside, the grain stays stable through Denver's humidity swings, and with a quality stain applied within 30 days and re-coated every 2 to 3 years it lasts 20+ years. At 5,280 feet UV runs roughly 20 to 25 percent stronger than sea level, so the stain schedule is what keeps cedar from graying out in a single season. We use #1 Grade Western Red Cedar with tight knots and no pith.

Aluminum-reinforced vinyl

If your HOA allows it and you want zero maintenance, aluminum-reinforced vinyl is the durable pick. We install CertainTeed Bufftech (now Catalyst), ActiveYards, and Ply Gem, not big-box vinyl, because the reinforced internal channels handle Denver wind and the quality cap stock uses a higher titanium dioxide load, which is what keeps the panel from yellowing by year 5 in Colorado sun. Premium lines carry lifetime warranty options.

<blockquote class="my-6 border-l-4 border-accent pl-4 italic text-foreground/85">"The install-cost difference between big-box vinyl and a quality reinforced line is small. The year-10 difference in the Denver sun is huge, one holds color, the other yellows."</blockquote>

Composite

Composite (Trex Seclusions and similar) blends wood fiber and polymer for a wood-grain look with no staining and no fading. Higher upfront than vinyl, lower long-term than cedar once you count staining labor. It's the fit for Denver HOA neighborhoods that mandate a wood look without the upkeep.

<div class="my-8"><div class="bg-card border border-border rounded-2xl p-6 md:p-8 max-w-xl mx-auto"><h3 class="text-xl font-bold font-display text-foreground mb-2">Get a Free Denver Privacy Fence Quote<p class="text-sm text-muted-foreground mb-5">Tell us what's going on with your lot and your HOA. We'll get back with a written, itemized quote, no obligation.</p><form class="space-y-4"><div class="grid grid-cols-1 md:grid-cols-2 gap-4"><input type="text" name="name" placeholder="Your name" required class="w-full rounded-md border border-border bg-background px-3 py-2 text-foreground" /><input type="tel" name="phone" placeholder="Phone" required class="w-full rounded-md border border-border bg-background px-3 py-2 text-foreground" /></div><input type="email" name="email" placeholder="Email (optional)" class="w-full rounded-md border border-border bg-background px-3 py-2 text-foreground" /><textarea name="message" placeholder="What are you fencing? (e.g. 'board-on-board cedar in Lowry, ARC approval needed')" rows="4" class="w-full rounded-md border border-border bg-background px-3 py-2 text-foreground"></textarea><button type="submit" class="w-full bg-accent text-accent-foreground rounded-md px-4 py-3 font-bold text-sm uppercase tracking-widest hover:brightness-110 transition-all">Get My Quote</button></form></div></div>

Denver's Clay and Older Housing Stock: Why the Footing Decides Everything

A Denver privacy fence contractor who has actually worked Wash Park and Capitol Hill knows the ground fights you before the wind does. Much of central and south Denver sits on expansive clay that swells when wet and shrinks when dry, and the older housing stock in Wash Park, Capitol Hill, and the Highlands often has fence lines that were set decades ago in shallow footings that never stood a chance against that movement.

<aside class="my-6 rounded-md border border-border bg-card p-4 text-sm">What we see on older lots: a cedar fence in Wash Park can look fine on top while the posts have rotted or worked loose at grade in the clay. It won't show from the street, so we check post integrity at grade before we quote, not after we start.</aside>

That's why we set PostMaster steel-core posts on every wood build and take footings to 36 inches on a gravel base with a domed concrete crown. The gravel breaks the water column so moisture migrates sideways instead of jacking the post up, the domed crown sheds water off the top instead of pooling it against the wood, and the steel core means the post doesn't rot at grade the way a solid cedar 4x4 does in this soil. On corner lots we also read the sight-triangle rules, because a solid 6-foot run planted right up to a Denver corner can violate the visibility requirement at the intersection.

Fencing an older lot in Wash Park, Capitol Hill, or the Highlands? [Talk to us](/contact) and we'll scope the footing and the setback before we quote.

Frequently Asked Questions

What is Denver's fence height limit?

Standard residential fence height in Denver is typically 6 feet in rear and side yards and lower in the front, measured from grade, but the exact rule varies by zone district and by lot position, and corner lots carry sight-triangle visibility requirements at the intersection. Because zoning, corner status, and slope all change the answer, we confirm the current rule for your specific address before we quote rather than quoting a number that might not apply. If your property is in an HOA, the Architectural Review Committee will also set its own height standard on top of city code.

Do I need Architectural Review Committee approval for a fence in Denver?

If your property is in an HOA, yes, almost always. The Architectural Review Committee sets material, color, height, and orientation rules on top of the City and County of Denver's zoning and permit requirements, and in neighborhoods like Lowry, Central Park, Highlands, and Stapleton the committee submission is where most projects stall. We prepare and submit the ARC package for you, coordinated with adjacent runs where the committee requires it, so you're not chasing signatures. If your lot isn't in an HOA, there's no committee, but a Denver permit may still be required depending on the height and whether gate automation is involved.

Do you handle fencing for Denver homeowners associations?

Yes. Fencing for a Denver homeowners association is a paperwork job as much as a build job, and we handle both. We read your HOA's spec first, prepare the Architectural Review Committee package with the material, color, height, orientation, and site drawing the committee needs, submit it and track approval, then build to the approved spec. We've worked the ARC process across Lowry, Central Park, Highlands, and Stapleton for 15+ years, so we know what each type of committee tends to bounce and how to get it approved the first time.

How deep should privacy fence posts be in Denver clay?

We set PostMaster steel-core posts to 36 inches deep on a gravel base with a domed concrete crown. Much of Denver sits on expansive clay and the metro averages 100+ freeze-thaw cycles a year, so a shallow footing heaves out over a few seasons. The gravel base breaks the water column so moisture migrates sideways instead of jacking the post up, the domed crown sheds water off the top, and the steel core keeps the post from rotting at grade the way a solid cedar 4x4 does in this soil. Depth and post material are the single biggest reason a Denver privacy fence lasts or leans.

What privacy fence materials do you install in Denver?

All three common Colorado options, matched to your HOA's approved list and your lot's exposure. For wood we use #1 Grade Western Red Cedar in board-on-board, shadowbox, board-and-batten, or hit-and-miss horizontal, with PostMaster steel-core posts on every build. For zero maintenance we install aluminum-reinforced vinyl from CertainTeed Bufftech (now Catalyst), ActiveYards, and Ply Gem, which holds color in Colorado sun far longer than big-box vinyl. For a wood look with no upkeep we install composite like Trex Seclusions, which is the fit for HOA neighborhoods that mandate a wood appearance without the staining schedule.

Is Julian Lopez involved in every Denver privacy fence job?

Julian or a direct crew member is on every job we do. We don't subcontract to crews you've never met, and we don't dispatch through a lead service. When you call to schedule, the person who walks your lot and quotes the job is the person whose crew builds it. That's how we've operated across the Denver metro for 15+ years and 500+ projects, and it's why the ARC package and the footing spec are handled by the same people, not passed down a chain.

Privacy Fence in Denver Service Areas

We provide privacy fence in denver services across the Denver metro:

Ready to Get Started?

Get Free Quote 720-609-6094